USB disk
Originally Posted by
w00t
Thanks for the advice..
what i did was rebooted the server into the kernel net boot, mounted the 2 drives again and transferd the files i needed to the hd, all seems ok now. i shall reformat and remount the 2 drives
if you reformat them , use ext3 filesystem not FAT.
Thanks for the advice..
what i did was rebooted the server into the kernel net boot, mounted the 2 drives again and transferd the files i needed to the hd, all seems ok now. i shall reformat and remount the 2 drives
this means you need to make sure you have vfat support compiled into your current kernel, and when you mount the disk , add the vfat switch to the mount command, as file system type is not Linux.
W95 fat32 (lba)
w95 fat32
Originally Posted by
w00t
all i have for both is
drwxr-xr-x 7 root root 16384 Jan 1 1970 .
drwxr-xr-x 24 root root 4096 Nov 6 10:43 ..
:S
when i was in the netboot kernel. everything showed, since im now in HD boot, they wont
what file system type are you using there?
all i have for both is
drwxr-xr-x 7 root root 16384 Jan 1 1970 .
drwxr-xr-x 24 root root 4096 Nov 6 10:43 ..
:S
when i was in the netboot kernel. everything showed, since im now in HD boot, they wont
files could be hidden...
ll will not show hidden files, so try with ls -la maybe?
also , if its mounted properly it should contain a lost+found directory ..oddly its not showing that.
what file system type are you using there?
Hi
ive recently add a USB drive to my server. but there is no files showing in it. even tho i know there is files for example
[root@i 3]# ll
total 0
[root@i 3]# cd /2
[root@i 2]# ll
total 0
[root@i 2]#
yet when i try df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md1 49G 8.3G 38G 18% /
/dev/md3 1.3T 38G 1.2T 4% /home
/dev/sdc1 596G 405G 192G 68% /2
/dev/sdd1 15G 16K 15G 1% /3
any ideas??