OVH Community, your new community space.

work on London network


oles@ovh.net
06-03-2011, 11:50
Hello,

We have completed work in London. The POP has been transferred to another datacentre. We have set up the second router. Linx 224 is past 4x10G and the Linx 226 remains at 2x10G. We still have transits to do. The collection of the VoIP with BT is through the old bay that we could not be transferred.

A small photo during the work:
http://demo.ovh.net/fr/5b7cb9181cd90...b8282f51d3d3d/

In the middle we have the Infinera transport with 140Gbps of capacity from Roubaix and from Amsterdam. Then the 2 sides of the 2 routers: ldn-1-6k and ldn-5-6.

The network schema:
http://weathermap.ovh.net/london
and global:
http://weathermap.ovh.net/backbone

On the MRTG graphs we now see that a peer that we have on Linx, manages the QoS brutally as with a chainsaw. Between 10am/6pm and 1am, it must make a QoS by limiting all its peers (or OVH only) at a fixed value to prevent the links from its network from saturation ... like that before, it saturates its network and therefore the problem does not exist! ...

The MRTG graph:
http://demo.ovh.net/fr/22f03f3cbc478...f1d3ce3f7038b/

The next step: increasing transport capacity of Amsterdam/Warsaw from 2x10G to 4x10G and Frankfurt/Warsaw from 2x10G to 4x10G. We will also remove 1x10G Prague/Warsaw which is useless. The 8x10G to Warsaw will be tied on 4 routers: 2 to Amsterdam and 2 to Frankfurt and with traffic management with load balancing, from Roubaix, we will exploit all of these links.

The step in parallel: increased capacity to Italy with an upgrade from 2x10G to 4x10G to increase capacity and peering with Interbusiness (AS3269) to from 1x10G to 3x10g.

And more: the USA.

Towards the end of the year we'll be able to increase the capacity of our 2 routers in Roubaix (ASR) from 1.2Tbps to 3.84Tbps ... and thus triple the outgoing bandwidth of Roubaix.

All the best,
Octave

Nettus
24-02-2011, 02:26
Hello,
Tonight, tomorrow and the next night, we will perform
work on our network POP in London. We must
physically transfer the POPs Global Switch Telehouse
in order to add new routers and increase
LINX peering capacity. Then secure the links
Europe / USA. We will also move along the transport
Roubaix distance between London / London / Amsterdam. In short,
the heavy ...

The work will take much of the night. A
new router will be started. We will move in a subsequent
part of transit and the LINX 226. Tomorrow in the day,
we will move the 10G link between London and New York. Then
Following next, the rest of transit and peering LINX
224 we will upgrade in 4x10G. We will also move the
collection of voices we have with BT in London.

Learn more and follow the task:
http://travaux.ovh.net/?do=details&id=5172

Regards
Octave

oles@ovh.net
23-02-2011, 22:54
Hello,

Tonight, tomorrow and the next night, we will perform the work on our POP in London. We need to physically transfer the POPs Global Switch to Telehouse to add new routers and increase capacity on LINX peering. Then secure Europe / USA links. We will also move the long distance transport between Roubaix/London and London/Amsterdam. In short, heavy ...

The work will take much of the night. A new router will be started. We will move in later part of the LINX transit and 226. Tomorrow in the day, we will move the 10G link between London and New York. Then after following the rest of the transit and peering LINX 224 we will upgrade to 4x10G. We will also move the collection of voices we have with BT London.

More information:
http://status.ovh.net/?do=details&id...d628d2aced2d62

All the best,
Octave