Configure Network for WIN Guest OS on Xenserver 6.1
dediuser
16-06-2013, 18:15
Originally Posted by
RikT
Just a quick shot in the dark here when you created the vmac did you use the ovh vmac or the VM vmac as you are using esxi you need the VM mac
For ESXI I was always using VM mac, which starts with 00-50-56.
Originally Posted by
dediuser
Ok, reinstalled server from ovh manager to ESXI 5 and I am receiving same problem. On Esxi with both selected adapter I am getting same problem. No Internet connection. Disabled firewall doesn`t change anything.
Here is my ipconfig /all:
Code:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : vmxnet3 Ethernet Adapter (tried E1000 adapter too)
Physical Address. . . . . . . . . : 00-50-56-02-24-AB (<-- adress generated and associated by ovh manager)
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 178.xx.xx.157(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 188.xxx.xxx.254
DNS Servers . . . . . . . . . . . : 213.186.33.99
NetBIOS over Tcpip. . . . . . . . : Enabled
marks any ideas?
Just a quick shot in the dark here when you created the vmac did you use the ovh vmac or the VM vmac as you are using esxi you need the VM mac
macole111
16-06-2013, 13:43
I would just ask them tomorrow to take a look at the routing, I expect that is the issue.
-macole111
dediuser
16-06-2013, 13:08
Originally Posted by
macole111
Just to let you know on your last ipconfig the sunset mask should be 255.255.255.255 not 255.255.255.0
Not sure if that will fix your info though, do you have the vmac the from the manager set on the VM? sorry can see you have now, if you ask support you can get them to take a look. I have had it before that the mac doesn't set on their routers so they have to do it manually.
-macole111
Thanks macole for suggestion, I did with 255.255.255.255. Same result. Last time, when I was configuring kimsufi 16G, I didn`t have any problem with network.
macole111
16-06-2013, 08:38
Just to let you know on your last ipconfig the sunset mask should be 255.255.255.255 not 255.255.255.0
Not sure if that will fix your info though, do you have the vmac the from the manager set on the VM? sorry can see you have now, if you ask support you can get them to take a look. I have had it before that the mac doesn't set on their routers so they have to do it manually.
-macole111
dediuser
15-06-2013, 22:47
Hmmm.... Tried to install ESXI 4 version. I am having the same problems with Network "Unidentified Network". Virtual Mac created in OVH manager for vmware. This getting to be not funny...
dediuser
14-06-2013, 23:44
Originally Posted by
marks
the second network configuration will definitely not work. For the first one, have you tried to disable the firewall, in case it's giving any problem?
it could be checked whether there is a problem with the ACL of the switch. Show us the output of ipconfig /all and we can check.
But if it's a problem on server configuration, we won't be able to do much about it.
Ok, reinstalled server from ovh manager to ESXI 5 and I am receiving same problem. On Esxi with both selected adapter I am getting same problem. No Internet connection. Disabled firewall doesn`t change anything.
Here is my ipconfig /all:
Code:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : vmxnet3 Ethernet Adapter (tried E1000 adapter too)
Physical Address. . . . . . . . . : 00-50-56-02-24-AB (<-- adress generated and associated by ovh manager)
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 178.xx.xx.157(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 188.xxx.xxx.254
DNS Servers . . . . . . . . . . . : 213.186.33.99
NetBIOS over Tcpip. . . . . . . . : Enabled
marks any ideas?
the second network configuration will definitely not work. For the first one, have you tried to disable the firewall, in case it's giving any problem?
it could be checked whether there is a problem with the ACL of the switch. Show us the output of ipconfig /all and we can check.
But if it's a problem on server configuration, we won't be able to do much about it.
dediuser
14-06-2013, 00:57
Hello everybody,
I have some problem configuring network on xenserver. Done this on ESXi, but not on xenserver. I have created VMAC and added to my virtual machine. Guest OS is Win 7 x64.
So here are the settings I tried:
IP: ip failover
netmask: 255.255.255.255
gateway: hostip with end 254
result: don`t work
IP: ip failover
netmask: 255.255.255.0
gateway: ip failover
result: don`t work, after I open IP4 settings back gateway ip is "blank"
Does anybody have met with this and know maybe solution for this?