[Myatu]

32 GB of Swap? That's a bit much, don't you think? Try reducing that to 4 GB tops (and if you must, enable ZRam or just add another file for swap).

And as noted already, you could make a /boot partition as the first partition in RAID-1 (250MB is plenty) and the rest as RAID-0 (including the root partition).

[K.Kode]

can somebody look over this and tell me if it is correct cause so i can just have one drive

That's fine, the /home partition is RAID 0 so will use the free space of both drives extended into 1 partition.

[aeh]

can somebody look over this and tell me if it is correct cause so i can just have one drive

/home will be 2*~932gb as it says (i.e. 1864GB in total to the filesystem, but split over two drives physically)

You could always do /boot at 500MB in RAID1 .. then set / to RAID0 with the rest (minus swap).

[RogEnk]

You have to select expert mode, and then define the partition layout as stated above.

[tinlizzy]

can somebody look over this and tell me if it is correct cause so i can just have one drive

[tinlizzy]

In manager reinstall your os and when it asks for partial layout select custom then make it raid 0.

there is no option for the my friend i have tried that

[kayomani]

In manager reinstall your os and when it asks for partial layout select custom then make it raid 0.

[tinlizzy]

Hello i currently have just recieved my KS 16G server after a very long wait and now it seems i can only use 1tb of the 2tb space in my home dir.

i would like to put the whole disk into one i did read you need to change from raid 1 to raid 0 so that i can use the whole disk but i do not see a option for it.

does anyone know how to do this or a set of commands to do it.

thanks awaiting any replys