[NeddySeagoon]

amartin99,

Boot in Linux Rescue mode and run the lspci command.
The raid controller will be listed. There may be several, as the motherboard is probably capable of fakeraid.
Post the output of lspci here if you are not sure or Google the text a line at a time.

[amartin99]

hello I got an SYS-E32-4 with hard raid
the SYS installer is simple enough to set raid0
but after install it was not rad0 it was raid1

I have someone that can set it in SSH before install but we need to know what the controller type is ?