[Abdullah]

sss

[Abdullah]

i jsut called them Yeeeeb they working on my server the phone more better than mails support thx you every one

Hello there the support asked me for this info


[root@ns381949 ~]# fdisk -l
Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xb5b8a7ad
Device Boot Start End Blocks Id System
/dev/sdb1 1 243201 1953512001 83 Linux
Partition 1 does not start on physical sector boundary.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.

Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 1 243202 1953514583+ ee GPT
Partition 1 does not start on physical sector boundary.



++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++
[root@ns381949 ~]# smartctl -a -d ata /dev/sda
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-042stab090.4] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA DT01ACA200
Serial Number: 83LYV7DKS
LU WWN Device Id: 5 000039 ff3dba8c3
Firmware Version: MX4OABB0
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Tue Jun 24 22:31:45 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (14344) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 239) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 140 140 054 Pre-fail Offline - 69
3 Spin_Up_Time 0x0007 129 129 024 Pre-fail Always - 294 (Average 292)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 38
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 4838
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 38
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 45
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 45
194 Temperature_Celsius 0x0002 171 171 000 Old_age Always - 35 (Min/Max 15/41)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4717 -
# 2 Short offline Completed without error 00% 4710 -
# 3 Short offline Completed without error 00% 4709 -
# 4 Short offline Completed without error 00% 4702 -
# 5 Short offline Completed without error 00% 76 -
# 6 Short offline Completed without error 00% 74 -
# 7 Short offline Completed without error 00% 74 -
# 8 Short offline Completed without error 00% 73 -
# 9 Short offline Completed without error 00% 66 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

++++++++++++++++++++++++++++++++++++++

[root@ns381949 ~]# smartctl -a -d ata /dev/sdb
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-042stab090.4] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA DT01ACA200
Serial Number: 83LYXPPKS
LU WWN Device Id: 5 000039 ff3dbb200
Firmware Version: MX4OABB0
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Tue Jun 24 22:32:24 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (14631) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 244) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 140 140 054 Pre-fail Offline - 69
3 Spin_Up_Time 0x0007 130 130 024 Pre-fail Always - 290 (Average 292)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 39
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 4838
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 39
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 51
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 51
194 Temperature_Celsius 0x0002 171 171 000 Old_age Always - 35 (Min/Max 16/43)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4717 -
# 2 Short offline Completed without error 00% 4710 -
# 3 Short offline Completed without error 00% 4709 -
# 4 Short offline Completed without error 00% 4702 -
# 5 Short offline Completed without error 00% 76 -
# 6 Short offline Completed without error 00% 74 -
# 7 Short offline Completed without error 00% 74 -
# 8 Short offline Completed without error 00% 74 -
# 9 Short offline Completed without error 00% 66 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
[root@ns381949 ~]#


++++++++++++++++++++++++++++++++++

[root@ns381949 ~]# cat /proc/mdstat
Personalities :
unused devices:
[root@ns381949 ~]#

[Abdullah]

i jsut called them Yeeeeb they working on my server the phone more better than mails support thx you every one

[Abdullah]

You have only messaged them 5 Hours and 20 minutes ago. You haven't had a hardware failure as far as anyone can tell so what do you expect?

i have mailed them about the system freeze all times when i install cpanel or install vps i have to reboot server to get working they for i have tryed to format and reload system with ext4


An error occurred on rebooting your server.

[Jasgriff]

You have only messaged them 5 Hours and 20 minutes ago. You haven't had a hardware failure as far as anyone can tell so what do you expect?

[Abdullah]

Looks like your two disks aren't mirrored. Is that deliberate? If not, your server is very vulnerable to disk failure.

Not mirrored i am not using software raid system i have cancel it and ruing system with out raid

i have send this to support they never answer back what must i do now ?

[mike_]

Looks like your two disks aren't mirrored. Is that deliberate? If not, your server is very vulnerable to disk failure.

[Abdullah]

Hello mike thx you for answer the first problem still cant found any fix or answer why showing like that

the scend problem

[root@ns381949 ~]# yum install parted
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirrors.coreix.net
* extras: mirrors.coreix.net
* openvz-kernel-rhel6: mirrors.ircam.fr
* openvz-utils: mirrors.ircam.fr
* soluslabs: mirror.eu1.soluslabs.net
* updates: mirrors.coreix.net
openvz-utils | 951 B 00:00
soluslabs | 951 B 00:00
updates | 3.4 kB 00:00
Setting up Install Process
Package parted-2.1-21.el6.x86_64 already installed and latest version
Nothing to do
[root@ns381949 ~]#


[root@ns381949 ~]# parted -l
Model: ATA TOSHIBA DT01ACA2 (scsi)
Disk /dev/sda: 2000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number Start End Size File system Name Flags
1 20.5kB 1049kB 1029kB primary bios_grub
2 2097kB 21.0GB 21.0GB ext4 primary
3 21.0GB 1994GB 1973GB ext4 primary
4 1994GB 2000GB 6290MB linux-swap(v1) primary


Model: ATA TOSHIBA DT01ACA2 (scsi)
Disk /dev/sdb: 2000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos

Number Start End Size Type File system Flags
1 32.3kB 2000GB 2000GB primary ext4

[mike_]

Well I'm not sure what the first problem is, I'm sure somebody here can help.

As for the second, the answer is in the output:

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.

Big disks are partitioned using GPT and fdisk doesn't support GPT. You need to use parted instead.

yum install parted
or
apt-get install parted
then
parted -l

[Abdullah]

Hello there

Problem 1 :

[root@ns381949 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
devtmpfs 16G 176K 16G 1% /dev
tmpfs 16G 0 16G 0% /dev/shm
/dev/sda2 20G 1.5G 17G 8% /
/dev/sda3 1.8T 336M 1.7T 1% /vz
/dev/sda2 20G 1.5G 17G 8% /var/named/chroot/etc/named
/dev/sda2 20G 1.5G 17G 8% /var/named/chroot/var/named
/dev/sda2 20G 1.5G 17G 8% /var/named/chroot/etc/named.conf
/dev/sda2 20G 1.5G 17G 8% /var/named/chroot/etc/named.rfc1912.zones
/dev/sda2 20G 1.5G 17G 8% /var/named/chroot/etc/rndc.key
/dev/sda2 20G 1.5G 17G 8% /var/named/chroot/usr/lib64/bind
/dev/sda2 20G 1.5G 17G 8% /var/named/chroot/etc/named.iscdlv.key
/dev/sda2 20G 1.5G 17G 8% /var/named/chroot/etc/named.root.key
[root@ns381949 ~]#

8 times /dev/sda2 20G 1.5G 17G = when i test df -h



Problem 2

[root@ns381949 ~]# fdisk -l | grep '^Disk'

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.

Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes
Disk identifier: 0xb5b8a7ad
Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
Disk identifier: 0x00000000
[root@ns381949 ~]#